Changeset 6401


Ignore:
Timestamp:
06/25/15 15:33:02 (4 years ago)
Author:
stefan
Message:

updated 7.8 params

Location:
trunk/params
Files:
9 added
40 edited

Legend:

Unmodified
Added
Removed
  • trunk/params/activated_scripts.d

    r5930 r6401  
    22#         activated_scripts Configuration File  
    33# 
    4 MyModuleId    MOD_ACT_SCR # wave_server's module id 
     4MyModuleId    MOD_ACT_SCR # activated_scripts' module id 
    55 
    66InRing     TEST_RING    # Transport ring to find ACTIVATE_MODULE messages on, 
  • trunk/params/arc2trig.d

    r2843 r6401  
    2525# PostCodaTime 10.0 
    2626        # seconds of post-coda cutoff data to save (default=10.). 
     27# MinDuration  60.0 # save this much regardless of above settings! 
     28 
     29# Optional parameter to over ride above PrePickTime and PostCodaTime (requires MinDuration) 
     30# UseOriginTime 1       # use the origin time for the start of every trace 
  • trunk/params/binder_ew.d

    r5930 r6401  
    6464 grid_wt 2  2 
    6565 grid_wt 3  1 
     66 
     67# optional setting to ignore the location code in same station decision making, otherwise the Station/Network/Location codes are used to 
     68# decide if a pick on a given channel is at the same station as another channel at that station 
     69# 
     70# ignore_loc_code_in_same_station_decision 1     # set to 1 to turn on, or 0 to turn off, if not set, it is off by default  
     71                                                 # yes, its a horribly long name, but so be it...you know what it means!! 
    6672 
    6773# new optional feature to prevent event collision during stacking (nucleation) of events: 
  • trunk/params/carlsubtrig.d

    r5190 r6401  
    3737                                #   written - REQUIRED. 
    3838HeartBeatInterval       30      # Heartbeat Interval (seconds). 
     39 
     40 
     41# PlaybackMode - a new option to allow playback of historic data, start time of clock  
     42#               comes from the first trigger time (not the system). 
     43#PlaybackMode 1 
    3944 
    4045# 
  • trunk/params/coda_aav.desc

    r6237 r6401  
    2323# 
    2424# 
    25 modName   pick_ew 
    26 modId     MOD_PICK_EW 
    27 instId   ${EW_INST_ID} 
     25modName   coda_aav 
     26modId     MOD_CODA_AAV 
     27instId    ${MYINST} 
    2828# 
    2929# 
     
    4242# message for this process_id if it declares the patient dead. 
    4343# 
    44 # restartMe 
     44restartMe 
    4545# 
    4646# 
  • trunk/params/coda_dur.desc

    r6237 r6401  
    2323# 
    2424# 
    25 modName   pick_ew 
    26 modId     MOD_PICK_EW 
    27 instId   ${EW_INST_ID} 
     25modName   coda_dur 
     26modId     MOD_CODA_DUR 
     27instId    ${MYINST} 
    2828# 
    2929# 
     
    4242# message for this process_id if it declares the patient dead. 
    4343# 
    44 # restartMe 
     44restartMe 
    4545# 
    4646# 
  • trunk/params/condenselogo.d

    r2843 r6401  
    1919#         Installation    Module      Message Types 
    2020#----------------------------------------------------------------- 
    21 GetLogo  INST_WILDCARD  MOD_WILDCARD  TYPE_TRACEBUF 
     21GetLogo  INST_WILDCARD  MOD_WILDCARD  TYPE_TRACEBUF2 
     22# or specific installations: 
     23GetLogo  INST_PRSN      MOD_WILDCARD  TYPE_TRACEBUF2 
    2224 
    2325 
     
    3032                             # If non-zero, use original installation_id in 
    3133                             #   outgoing logo (replace only the module_id). 
     34 
     35#UseNewInstid INST_BLAH     # rewrite installation ID if necessary! 
    3236                              
     37# new PTWC features (OPTIONAL) 
     38 
     39# get specific stations if a TRACEBUF2 message 
     40#Sta   LGNH.--.CN.-- 
     41#Sta   PAPH.--.CN.-- 
     42#Sta   FDF.--.G.-- 
     43#Sta   HDC.--.G.-- 
     44 
     45# or get all from a given network: 
     46#Net CU 
  • trunk/params/debias.d

    r3971 r6401  
    11# 
    22#                     Configuration File for debias 
     3# 
     4# debias removes a mean value over a specified time window 
     5#                       it DOES NOT perform any other actions on the data. 
    36# 
    47 MyModId            MOD_DEBIAS 
     
    2023                              # its filter coefficients and then 
    2124                              # exit, specify "TestMode". 
    22 # PassThru                     # If you want packets not specified in the  
    23                               # GetSCNL's below to be included in the OutRing, 
    24                               # specify "PassThru". 
    2525 
    2626 AvgWindow   5                # Number of seconds of data to use to compute 
    2727                              # the rolling average, which gets removed from 
    2828                              # each sample 
     29 
     30# GetAllSCNLs                  # Process packets w/ SCNLs not covered by a GetSCNL 
     31                              # command (see below) w/o changing the SCNL 
    2932 
    3033# Specify logo(s) of the messages to grab from the InRing. 
     
    3740 GetWavesFrom    INST_WILDCARD MOD_WILDCARD TYPE_TRACEBUF2  
    3841 
    39 # List SCNL codes of trace messages to decimate and their output SCNL codes. 
     42# List SCNL codes of trace messages to debias and their output SCNL codes. 
    4043# If old GetSCN command is used, location code is set to "--". 
    4144# Wildcard characters are not allowed here. 
     
    4346#         Input-SCNL      Output-SCNL 
    4447 GetSCNL  NP2 BHE ZZ --   NP2 BHX ZZ 01 
    45   
    46  
    47  
  • trunk/params/debias.desc

    r6237 r6401  
    7878# 
    7979err: 3  nerr: 1  tsec: 0  page: 0  mail: 10 
    80 text: "Call to the decimation routine failed." 
     80text: "Call to the debias routine failed." 
    8181# 
  • trunk/params/eqassemble.d

    r6239 r6401  
    99                            # 1 = turn on disk log 
    1010                            # 2 = write disk log but not to stderr/stdout 
     11 
     12# optional flag to see link messages 
     13# Debug 
    1114 
    1215# List the message logos to grab from transport ring 
  • trunk/params/eqfilter.d

    r5930 r6401  
    206206MinMagTest     INST_UW         2.5 
    207207MinMagTest     INST_WILDCARD   4.0 
     208 
     209# a crude teleseism filter (3 args to pass in) 
     210#             min num first motions to run test, min gap to run test, max percent same polarity  
     211# if all tests pass, that more than some percent all have the same first motion, the event fails 
     212#  probably a teleseism OR a blast 
     213#PolarityTest    7    180   70.0 
    208214  
    209215#Ncoda test 
  • trunk/params/ew2ringserver.d

    r5931 r6401  
    1919  
    2020 MaxMsgSize     4096          # maximum size (bytes) for input/output msgs 
    21  QueueSize       400          # max# messages in outgoing circular msg buffer 
     21 QueueSize      1000          # max# messages in internal circular msg buffer 
    2222 
    2323# 
     
    2727#FlushLatency 300             # flush any buffered data streams idle for this many seconds 
    2828#ReconnectInterval 10         # reconnect to ringserver at this interval in seconds 
    29  
     29#Int32Encoding STEIM2         # specify miniSEED encoding for 32-bit integers, default STEIM2 
     30                              #   possible values are STEIM2, STEIM1 or INT32 (no compression) 
    3031 
    3132# List of station/channel/network/loc codes to process. 
  • trunk/params/ew2rsam.d

    r5190 r6401  
    3232#  characters are allowed for both options): 
    3333# 
    34 #   o IncludeSCN (required) 
    35 #   o ExcludeSCN (optional) 
     34#   o IncludeSCN (required) or IncludeSCNL 
     35#   o ExcludeSCN (optional) or ExcludeSCNL 
    3636# 
    3737# 
     
    5959IncludeSCN * * * 
    6060 
     61# or if TBUF2s which have location codes use IncludeSCNL 
     62 
     63IncludeSCNL * * * * 
     64 
     65# if you want to exclude NC Location codes from TBUF2's that end in 02 
     66# ExcludeSCNL * * NC 02 
     67 
    6168# 
    62 # MaxSCN - max number of SCNs to track 
     69# MaxSCN - max number of SCNs or SCNLs to track 
    6370# 
    6471MaxSCN          50 
  • trunk/params/ew_rsamalarm.d

    r5931 r6401  
     1TreatAsIni 
    12LogFile 1 
    23MaxMsgSize 50000 
  • trunk/params/ewaccel.d

    r4598 r6401  
    1919 Floor 1 100 5405 Hde NP BS 1.5 
    2020 
    21 BaseShearThreshold 2.5  # force threshold to trigger alarm 
     21BaseShearThreshold 2.5  # force threshold to trigger alert 
    2222 
  • trunk/params/ewhtmlemail.d

    r5930 r6401  
    1818 
    1919 
     20#CenterPoint 45.0 -121.0  # OPTIONAL lat and lon for EmailRecipientWithMinMagAndDist 
     21 
    2022# ShortHeader - OPTIONAL flag to compress the header table and leave less whitespace 
    2123# 
    2224 
     25# 
     26# DontShowMd - Optional feature to remove Md from the report. 
     27# 
     28# DontUseMd - Optional feature to not use Md  for email decisions for any EmailRecipientWithMinMag args 
     29# 
    2330# UseML - OPTIONAL feature to turn on TYPE_MAGNITUDE (localmag) use 
     31# UseMW - OPTIONAL feature to turn on TYPE_MAGNITUDE and detect MW  magnitude messages 
     32# 
    2433# MagWaitSeconds - OPTIONAL wait this long before releasing an  
    25 #                  email that may not have an ML, default 5 seconds 
     34#                  email that may not have an ML or MW, default 5 seconds 
    2635  
    2736# Note that hyp2000arc messages can be very large if the number of stations 
     
    100109 
    101110 EmailRecipientWithMinMag test2@mail.com 2.0   # only send to this person if mag is >= 2.0 
     111 
     112 EmailRecipientWithMinMagAndDist test3@mail.com 2.0 3.0  # only send to this person if mag is >= 2.0 and dist from event <=3km 
    102113  
    103114 
  • trunk/params/ewhtmlreport.d

    r5931 r6401  
    1616 HTMLFile               temp/report             # where the periodic report gets written 
    1717 HTMLBaseFile           ewhtmlreport.html       # the location of the base .html file 
    18  ReportInt              1               # Interval between reports, in days 
     18 WriteIndex             temp/index.html         # OPTIONAL command to also write the HTMLFile to a statically named file. 
     19 ReportInt              1.0             # Interval between reports, in days (defaults to 1 day, can be fraction) 
    1920 ReportTime             -1              # UTC time of the report 0 - 23. -1 means send at start time 
    2021 ReportPeriod   200             # Number of days considered for each report - Beware that this amy lead to VERY large files (60) 
  • trunk/params/ewmseedarchiver.d

    r6139 r6401  
    5151# 
    5252#Archive /data/archive/%n/%s/%Y.%j.%n.%s.%l.%c.mseed 
     53# Windows example (may use backslashes or forward slashes): 
     54#Archive D:\data\archive\%n\%s\%Y.%j.%n.%s.%l.%c.mseed 
    5355# 
    54 # The Windows compile doesn't like forward slashes nor drive letters;  
    55 # something like this worked. (note double, triple and single slashes!) 
    56 # Only one directory-level substitution appears to work on Windows. 
    57 # Archive  ..\\data\\msarchive\\\%s\%Y.%j.%n.%s.%l.%c.mseed 
    5856 
    5957 
  • trunk/params/ewnotify.d

    r5930 r6401  
    1616MailProg        /usr/bin/mail 
    1717 
    18 AlarmSubject    EWNotify: Alarm raised 
     18AlertSubject    EWNotify: Alert message 
    1919TestSubject             EWNotify: Test signaled 
  • trunk/params/ewshear.d

    r5931 r6401  
    3232  
    3333# 
    34 # Optional override of threshold for alarm 
     34# Optional override of threshold for alert 
    3535# 
    36 # PctShearThreshold 25  # % change in velocity to trigger alarm; default is 20 
     36# PctShearThreshold 25  # % change in velocity to trigger alert; default is 20 
    3737 
    3838# 
  • trunk/params/ewthresh.d

    r5190 r6401  
    88 MaxMsgSize     4096          # maximum size (bytes) for input/output msgs 
    99 
    10  Threshold 0202 BHZ QT TT 749.0     # SCNL to monitor & threshold to look for 
     10 
     11 # Up to 1000 Threshold or ConvertedThreshold commands: 
     12 # Threshold has 5 arguments, the SCNL and threshold value to compare against 
     13 # threshold value is a real value (tracebuf2x scaling factor will be used if 
     14 # present in the tracebuf2 header). 
     15 #  
     16 Threshold 0202 BHZ QT TT 749.0      
     17 
     18 # 
     19 # or Optional converted threshold where 6 values are SCNL then threshold 
     20 # and conversion factor multiplier from counts to units of thresh 
     21 # this can be used where input tracebuf2's are not of the tracebuf2x flavor 
     22 #ConvertedThreshold STA HNZ NN LL 749.0 0.938 
    1123 
    1224 DebugLevel 0   # set to 1 to see thresh messages on stderr,  
     
    1729# NOTE only ONE of these ThreshVotes lines can be specified: 
    1830# ThreshVotes NumTrig TimeSpanSeconds PreEventSeconds NumSCNLs SCNL1 SCNL2 ... 
    19 # Generate a triglist message whenever NumTrig alarms occur within TimeSpanSecconds 
     31# Generate a triglist message whenever NumTrig alerts occur within TimeSpanSecconds 
    2032#    Time of message is PreEventSeconds before first trigger; listed SCNLs are included 
    2133# 
  • trunk/params/gmew.d

    r5930 r6401  
    236236# LookAtVersion All 
    237237 
     238 
     239## OPTIONAL PARAMETER 
     240## sendActivate: When present this parameter sends an activated_scripts 
     241# message with the eventID as the first argument and written XML file as the 
     242# second argument. This is convenient when you want to run a script (such as  
     243# the ShakeMap suite) after the XML is created. This is optional. 
     244# 
     245#sendActivate 
     246 
     247## OPTIONAL PARAMETER 
     248# this is the logo to use for the sendActivate message,  
     249# if it is not set, then the logo is the name of the gmew module 
     250# 
     251# sendActivateLogo MOD_ACTIVATED_SCRIPTS 
  • trunk/params/heli_ewII.d

    r6375 r6401  
    4848 Plot ADK  SHZ AT -- 12 1   -8  PST  1  0  20  20  15 0.1  1.5  1   "Mt. Rainier Summit" 
    4949 
     50 
    5051    # *** Optional Commands *** 
    5152 
  • trunk/params/import_gen_pasv.d

    r2843 r6401  
    3838 
    3939 SenderIpAdr        134.20.200.137   # The IP address of the export host 
     40 SenderNetMask      255.255.255.255  # OPTIONAL network mask setting to open to any sender IP on a network or a specific IP 
     41                                     # 0.0.0.0 means match ANY incoming IP 
     42                                     # 255.255.255.0 means match ANY incoming IP on the same network component of SenderIpAdr 
    4043 
    4144 SenderHeartRate    60               # Sender's heart beat interval in seconds 
  • trunk/params/loc_wcatwc.d

    r5931 r6401  
    2121MaxTimeBetweenPicks      2.    # Maximum allowable time between P-picks placed in the same buffer (minutes) 
    2222MinPs                    5     # Minimum number of P-times used in location (5 min) 
     23MaxDistance              5.    # Max distance (degrees) allowed for buffer sort 
    2324# 
    2425# BVals 
     
    6364IndexFile   "Data/Cities/llindx.fer"       # FE Region index file 
    6465LatFile     "Data/Cities/lattiers.fer"     # FE Region lat file 
     66# below are for windows only 
     67FERegionPath  "Data/voice/feregion/"   # Path to FE Region names 
     68DistancePath  "Data/voice/distance/"   # Path to Distances 
     69DirectionPath "Data/voice/dir/"        # Path to Directions 
     70CitiesPath    "Data/voice/city/"       # Path to Cities 
    6571# 
    6672Iasp91File    "Data/EarlyBird/Iasp91/iasp91"                      # iasp91 file 
  • trunk/params/localmag.d

    r5930 r6401  
    4141#                          but not station depth.) 
    4242#   nDist number: the number of table entries that follow. 
    43 #  Following these two commands are 'nDist' lines of distance and -logA0  
     43#  Following these two commands are `nDist' lines of distance and -logA0  
    4444#  values. The distance numbers must be integer values, in kilometers. 
    4545#  The -logA0 values are positive decimal values. 
     
    6262#                   distance in the SAC header. 
    6363 
    64 staLoc File /data0/earthworm/run/params/hypoinverse/stas/uw_sta.hinv 
     64staLoc File hypo_sta_FWI.list 
    6565 
    6666 
     
    6868#    this will be the same file as used for binder_ew. 
    6969 
    70 @uw_velocity.d 
     70#@uw_velocity.d 
     71 lay   0.0     3.5 
     72 lay   3.0     6.0 
     73 lay   15.0    7.00 
     74 lay   30.0    8.00 
     75 
     76 
    7177 
    7278# Speed of Sg wave; provides a good estimate of the Wood-Anderson peak arrival 
    7379 
    74 SgSpeed 3.39 
     80SgSpeed 3.98 
    7581 
    7682 
     
    8389#                            given as command-line option. 
    8490#    default: ARCH 
    85 # eventSource ARCH 
     91 eventSource ARCH 
    8692 
    8793 
     
    97103 
    98104# traceSource waveServer File servers 
    99  
    100  
    101 # Add STA COMP NET LOC 
    102 # Del STA COMP NET LOC 
    103 # SCNL selection is done by a selection list and a rejection list. 
    104 # The station selection command 'Add' specifies the names of  
     105traceSource waveServer 195.83.190.214:16020 195.83.190.214:16021 
     106# traceSource SACFile 
     107 
     108 
     109# Add STA COMP NET 
     110# Del STA COMP NET 
     111# SCN selection is done by a selection list and a rejection list. 
     112# The station selection command `Add' specifies the names of  
    105113# STA (station), COMP (component), and NET (network).  
    106 # The wildcard '*' may be used for any or all of STA, COMP, NET, LOC 
     114# The wildcard `*' may be used for any or all of STA, COMP, NET. 
    107115# COMP may be given as the first two letters of the component name, 
    108116# to select all direction desgnators are accepted for that component. 
    109117# If no Add commands are given, all SCNs will be selected. 
    110118# The Del command is used to put SCNs on the rejection list: 
    111 # for example: "Add * EL UW *" followed by "Del LAB EL UW *" to include 
    112 # all ELE and ELN components from UW except LAB.ELE.UW.-- and LAB.ELN.UW.--. 
     119# for example: "Add * EL UW" followed by "Del LAB EL UW" to include 
     120# all ELE and ELN components from UW except LAB.ELE.UW and LAB.ELN.UW. 
    113121# Localmag will NEVER use vertical components. 
    114122# List as many Add and Del commands as desired, one to a line 
    115123 
    116 Add * BH * * 
    117 Add * HH * * 
    118 Add * SL * * 
    119 Add * EL * * 
    120 Del LAB * UW * 
     124#Add FDF BH MQ 99 
     125#Add LAM HH MQ 99 
     126 
     127Add * * * * 
     128 
     129#Add IA2 EH MQ 
     130#Add FDF HH MQ 
     131#Add DEG EH GL 
     132#Add AMCL HH GL 
    121133 
    122134 
     
    145157 
    146158# readAmpDirect: flag to tell localmag to read Wood-Anderson amplitudes 
    147 #   directly from a 'trace' source instead of from Wood-Anderson traces.  
     159#   directly from a `trace' source instead of from Wood-Anderson traces.  
    148160#   If this flag is used, then traceSource must be one that includes  
    149161#   amplitude data, such as SAC files, EW database. 
     
    170182#           arrival and ends trace 60 seconds after estimated S arrival. 
    171183 
    172 traceTimes 5.0 60.0 
     184traceTimes 20.0 60.0 
    173185 
    174186 
     
    191203#        before searchStartPhase arrival to 45 seconds after Sg arrival 
    192204 
    193 searchTimes 1.0 45.0 
     205searchTimes 10.0 45.0 
    194206 
    195207 
     
    207219# default: z2pThresh 3.0 
    208220 
    209 z2pThresh 3.0 
     221z2pThresh 2.5 
    210222 
    211223# meanCompMags: If present, this command causes localmag to compute a  
     
    215227#    local magnitude for the station. 
    216228 
    217 # require2Horizontals: If present, this new command requires that both horizontal components 
    218 #    be valid in order for a station's channel mags to be used in the magnitude computation 
    219  
    220 # allowVerticals: If present, this allows the Richter.tab to have a 3rd column for vertical 
    221 #    logA0 attenuation and Z components will be included. WonYoung Kim of LCSN wrote a paper 
    222 #    in BSSA that computed vertical attenuation relationships for the NE USA  
    223  
    224 # if this next line is used, then the orientation char can be mapped  
    225 # to an actual orientation letter for use in localmag (which only knows N and E for horizontal 
    226 # components (not names like EH1 or EH2). 
    227 # 
    228 ChannelNumberMap   ENZ   # map 1 2 3 to ENZ to allow oddly oriented sensors to be used 
    229  
    230  
    231 # useMedian - an optional flag to turn compute magnitude using L1 norm instead of averaging 
    232  
    233 # ResponseInMeters - an optional flag to convert SAC P&Z from meters into what is required  
    234 #                       units of nanometers. Allows use of rdseed -pf  files directly. 
    235229 
    236230# WoodAndersonCoefs <period> <damp> <gain>: optional command to specify the 
     
    243237# 
    244238# default: WoodAndersonCoefs 0.8 0.8 2800 
    245  
     239WoodAndersonCoefs 0.8 0.7 2080 
    246240 
    247241# saveTrace: whether and how to save synthetic Wood-Anderson traces 
     
    252246#                dirFormat gives a formattted subdirectory name; the 
    253247#                  format string is that used for the "date" command applied 
    254 #                  to the event origin time, with the addition of '%i'  
    255 #                  to indicate the event ID and optionally '%v' for the 
    256 #                  origin version. Be careful with this; some 
     248#                  to the event origin time, with the addition of `%i'  
     249#                  to indicate the event ID. Be careful with this; some 
    257250#                  formats produce output not compatible with file names. 
    258251#                filename-format gives the formatted file name using 
    259252#                  % to introduce one of the format specifiers "sScCnN%" 
    260 #                  's' is the station name in lower case; 'S' is upper case 
    261 #                  Likewise for component and network names; '%' stands for 
     253#                  `s' is the station name in lower case; `S' is upper case 
     254#                  Likewise for component and network names; `%' stands for 
    262255#                  itself. All other characters are taken literally. 
    263256# 
    264257#   default: None (no Wood-Anderson traces are saved.) 
    265  
     258saveTrace SAC /home/ew/run_prod/SAC_WA/ %Y%m%d%H%M%i %S.%C.%N 
    266259 
    267260# outputFormat: how localmag reports its results; results are always logged 
     
    271264#             EWDB - send results to Earthworm database. 
    272265#  default: LM if using earthworm transport; no report otherwise 
    273  
     266outputFormat File magnitude_MQ.output 
    274267 
    275268# 
     
    289282#                            is SAC files. 
    290283 
    291 SACsource /data0/earthworm/working/src/localmag/Test/98042703361 %S.%C 
     284#SACsource /home/ew/run_prod/SAC_sources %S.%C 
    292285 
    293286 
     
    315308 
    316309# MyModId <module-id>: specify the module ID for localmag 
    317 # MyModId MOD_LOCALMAG 
     310# MyModId MOD_LOCALMAG_FWI 
    318311 
    319312# HeartBeatInterval int: How often localmag should beat its heart. 
     
    338331# 
    339332 
    340 getEventsFrom INST_WILDCARD MOD_WILDCARD 
    341 getEventsFrom INST_WILDCARD MOD_WILDCARD TYPE_LOC_GLOBAL 
    342  
    343 saveSCNL 1        # Output TYPE_MAGNITUDE channel mag lines with SCNL (old style was SCN) 
    344  
    345 eventXML 1        # Output shakemap style event information to XML file in sac dir 
     333#getEventsFrom INST_WILDCARD MOD_WILDCARD 
     334#getEventsFrom INST_WILDCARD MOD_WILDCARD TYPE_LOC_GLOBAL 
     335 
     336 
     337eventXML 0        # Output shakemap style event information to XML file in sac dir 
    346338                  # which can be specified in the saveTrace optional command. 
    347339                  # Note this can only work if you choose SAC file output at this time. 
    348340                  # This feature contributed by INGV. 
    349341 
    350 # saveXMLdir /mydir/eventXMLdir  # If set, will be used in lieu of the sac output dir 
     342# saveXMLdir /home/ew/run_prod/eventXML  # If set, will be used in lieu of the sac output dir 
    351343                                 # for the shakemap event XML output file. If set, also 
    352344                                 # turns on the saving of these files (i.e. eventXML  
    353345                                 # flag is ignored).... 
    354                                  #         <Event-Id>_<Origin-Version>_event.xml 
    355  
    356 # MlmsgOutDir /mydir/Mlmsgdir    # If set, all LM messages will be saved in distinct files 
    357                                  #         MlmsgOutDir/<Event-Id>_<Origin-Version>.lm 
    358  
    359 LogFile 1         # 1 -> Keep log, 0 -> no log file 
     346 
     347LogFile 0         # 1 -> Keep log, 0 -> no log file 
    360348                  # 2 -> log to module log but not to stderr/stdout 
    361349                  # default: LogFile 1 
     
    377365#   128   full frequency response function to STDOUT 
    378366#   256   input and output trace date including in padded area 
    379  
     367Debug 4 
    380368 
    381369# SCN Parameters: normally this command will be given as "@scn_param_file" 
    382370# to cause the separate file "scn_param_file" to be processed. 
    383  
    384  
    385 # Optional parameter to use with eqassemble which declares the version 
    386 # of an event such as Prelim, Rapid and Final. Possible values for the 
    387 # parameter LookAtVersion are: All, Prelim, Rapid and Final. 
    388 # Default is All. 
    389 # LookAtVersion All 
    390  
    391 # Not compute magnitude for for the stations which have not a phase in the ARC message. 
    392 # SkipStationsNotInArc 
    393  
    394 # Take in account only stations for which the weight of a phase is 
    395 # greater than MAX(weights in ARC) * (MinWeightPercent / 100.0) 
    396 # Used only with parameter SkipStationsNotInArc 
    397 # Range: 0 .. 99 
    398 # Default: 0 (all phases will be taken) 
    399 # MinWeightPercent 10.0 
    400  
    401 # MLQpar1 is the first parameter used for estimating the quality of magnitude. 
    402 # MLQpar1 is a real number and it has to be greater than zero.  If you do not 
    403 # declare MLQpar1 then the quality will be always equal to -1. 
    404 # Otherwise: 
    405 #          quality = Number of channels / ( Magnitude * MLQpar1) 
    406 #          If quality is greater than 1, it will be set to 1. 
    407 # MLQpar1 10.0 
    408  
    409  
    410 #Magnitude corrections per SCNL, tapers, and clip levels can be specified by this lookaside file example 
    411 @localmag.scnl_par.d 
  • trunk/params/localmag.desc

    r6237 r6401  
    8585err: 5  nerr: 1  tsec: 0  page: 0  mail: 0 
    8686text: "Magnitude message too long, may be truncated." 
     87# 
     88err: 6  nerr: 1  tsec: 0  page: 0  mail: 0 
     89text: "No local magnitude available for event." 
  • trunk/params/moleserv.d

    r5931 r6401  
    1212# For webserver options, see mongoose help at 
    1313# https://github.com/valenok/mongoose/blob/master/UserManual.md 
    14 WebServerOpt    listening_ports 8080 
     14WebServerOpt    listening_ports 0.0.0.0:8089 
    1515WebServerOpt    error_log_file  ./mongoose.log 
    1616WebServerOpt    document_root   ./html 
    1717 
    18 MoleDB                  mole 
    19 MoleUser                moleuser 
    20 MolePass                molepass 
     18MoleDB                  ${MOLEDBNAME} 
     19MoleUser                ${MOLEDBUSER} 
     20MolePass                ${MOLEDBPASS} 
    2121ODBCName                MySQLMole 
    2222 
  • trunk/params/mseed2tbuf.d

    r5931 r6401  
    11 
    2 #  tbuf2mseed just reuses the ringdup_scn file...its the same program, just compiled  
    3 # to write mseed out instead of tbuf2's 
     2# The mseed2tbuf command file is very similar to the ringdup_scn command file, as 
     3# it's basically the same program, just compiled to read mseed in instead of tbuf2s 
    44# 
    5 ringdup_scn configuration file 
     5mseed2tbuf configuration file 
    66# 
    77# 
     
    1313                                    # if 2, write to module log but not to  
    1414                                    # stderr/stdout 
    15  
    1615 Debug 1 
    1716# 
     
    4847# Send_scnl_remap JGR VHZ NC --   *   EHZ * *  # change component code only 
    4948# Send_scnl_remap CAL *   NC *    ALM *   * *  # send all component of CAL, but 
    50                                               # change the site code to ALM 
     49                                               # change the site code to ALM 
    5150Send_scnl * *  NP * 
    52  
  • trunk/params/nll_mgr.d

    r6385 r6401  
    44# 
    55MyModuleId MOD_EQPRELIM_NLL   # Label outgoing messages with this module id. 
    6                         # This program is part of a mega-module which is 
    7                         # started by eqproc or eqprelim.  All child 
    8                         # processes of eqproc/eqprelim should use the 
    9                         # same module id. 
     6# This program is part of a mega-module which is 
     7# started by eqproc or eqprelim.  All child 
     8# processes of eqproc/eqprelim should use the 
     9# same module id. 
    1010 
    1111RingName   HYPO_RING    # Write output to this transport ring 
     
    1313LogFile    2            # 0=no log; 1=errors; 2=errors & hypocenters 
    1414 
    15 SourceCode W            # Label summary cards with this character to 
    16                         # identify them as coming from Earthworm 
     15SourceCode W            # Label summary cards with this character to  
     16# identify them as coming from Earthworm 
    1717 
    1818 
     
    2020# 2006/06/16 AJL - Added following 
    2121 
    22 NllCtrlFile /home/anthony/opt/earthworm/nll_test/earthworm.in 
    23                                                  # NLL control file with full path 
    24                                                  # This files must exist. 
    25                                                  # (LOCFILES statement will be overwritten by nll_mgr) 
     22NllCtrlFile /home/anthony/opt/earthworm/nll_test/run/earthworm.in 
     23# NLL control file with full path 
     24# This files must exist. 
     25# (LOCFILES statement will be overwritten by nll_mgr) 
    2626 
    2727# Norther California 
    28 NllStaFile  /home/anthony/opt/earthworm/nll_test/NC.stations.EHZ.nll.txt 
     28NllStaFile  /home/anthony/opt/earthworm/nll_test/run/NC.stations.EHZ.nll.txt     
    2929# INGV 
    30 #NllStaFile  /home/anthony/opt/earthworm/nll_test/sta_list_ingv.in 
    31                                                  # NLL file containing station coordinates in NLL GTSRCE format 
    32                                                  # This file must exist. 
    33                                                  # Use an existing, empty file if station GTSRCE statements 
    34                                                  # are inside NllCtrlFile 
     30#NllStaFile  /home/anthony/opt/earthworm/nll_test/run/sta_list_ingv.in            
     31# NLL file containing station coordinates in NLL GTSRCE format 
     32# This file must exist. 
     33# Use an existing, empty file if station GTSRCE statements  
     34# are inside NllCtrlFile 
    3535 
    3636NllTimePath /temp/nlloc_tmp/taup/ak135/ak135     # NLL travel-time grid files path/root 
    37                                                  # These files must exist. 
     37# These files must exist. 
    3838 
    3939NllTimeSwap 1                                    # NLL LOCFILES iSwapBytesOnInput value 
    40                                                  # (0 = NO, 1 = YES) flag to indicate if hi and low 
    41                                                  # bytes of input time grid files should be swapped. Allows reading of 
    42                                                  # travel time grids from different computer architecture platforms 
    43                                                  # during TRANS GLOBAL mode location. 
     40# (0 = NO, 1 = YES) flag to indicate if hi and low  
     41# bytes of input time grid files should be swapped. Allows reading of 
     42# travel time grids from different computer architecture platforms  
     43# during TRANS GLOBAL mode location. 
    4444 
    4545NllOutPath  /temp/nlloc_tmp/earthworm/nll_mgr0   # NLL output file path without NLL root 
    46                                                  # This directory must exist. 
    47                                                  # IMPORTANT! - this path should be different from 
    48                                                  # the path used by any other 
    49                                                  # instances of modules containing nll_mgr. 
    50                                                  # NLL output to this path will only be overwritten 
    51                                                  # by output from subsequent events with same output name 
    52                                                  # (i.e. same first phase time). 
     46# This directory must exist. 
     47# IMPORTANT! - this path should be different from 
     48# the path used by any other 
     49# instances of modules containing nll_mgr. 
     50# NLL output to this path will only be overwritten 
     51# by output from subsequent events with same output name  
     52# (i.e. same first phase time). 
    5353 
    54 Hyp2000arcCompatibilityMode                      # Flag to allow nll_mgr to output full hyp2000arc messages : 
    55                                                  #   - location code present 
    56                                                  #   - shadow lines 
    57                                                  # Comment this line (only for legacy compatibility) 
    58                                                  #  if you want the old nll_mgr behaviour : 
    59                                                  #   - blank location code 
    60                                                  #   - no shadow lines 
    61  
  • trunk/params/nq2wws.d

    r4598 r6401  
    22# 
    33 
    4 #   nq2wws_ack configuration file 
     4#   nq2wws configuration file 
    55# 
    66#Background:   
    77# Import/Export are the long-distance message transfer 
    8 # modules. They operate as one-on-one pairs.  
     8# modules. They operate as one-on-one pairs. There are two variants of 
     9# export: export_generic, which ships messages with specified logos, and 
     10# export_scn which ships only trace data, but with specified SCN names. 
    911# 
    1012# Import/Export send heartbeats to each other, as well as into their 
     
    1921# defaulted, but can be set in this file (SocketTimeout). 
    2022# 
    21 # Nq2wws_ack maintains a circular FIFO buffer of messages to be shipped. The 
     23# Export maintains a circular FIFO buffer of messages to be shipped. The 
    2224# size of this buffer (RingSize) controls the maximum latency of the 
    2325# data. 
     
    5961                       #   generated with info about queue status of  
    6062                       #   each msg, socket alive msgs sent & received. 
    61  
    62 # Set up Message Queues  
    63 # Note: socket "alive" messages are not put in either queue 
    64 #----------------------------------------------------------  
    65  MaxMsgSize       1024         # maximum size (bytes) for input/output msgs 
    66  RingSize         6000         # number of msgs to buffer for export  
    67                                #  (msgs waiting to be sent to socket) 
    68  SendQueueLength   200         # Optional command: #msgs in SendQueue 
    69                                #  (msgs sent, acknowledgments pending) 
    70                                #  Valid range: 1-254 (default 100)  
     63# 
     64# Logos of messages to export to client systems 
     65#              Installation       Module       Message Type 
     66 GetMsgLogo    ${EW_INST_ID}     MOD_WILDCARD     TYPE_PICK2K 
     67 GetMsgLogo    ${EW_INST_ID}     MOD_WILDCARD     TYPE_CODA2K 
    7168  
    7269# ServerIPAdr and ServerPort specify the local IP address and port number 
     
    7572 ServerIPAdr  aaa.bbb.ccc.dd   # Export messages via this ethernet card    
    7673 ServerPort     16005          # Well-known port number to export msgs on 
     74 
     75 MaxMsgSize       128          # maximum size (bytes) for input/output msgs 
     76 RingSize         100          # number of msgs to buffer for export  
    7777 
    7878 SendAliveText   "alive"       # string sent to client as heartbeat  
     
    9595 
    9696# SocketDebug defaults to 0 
    97  SocketDebug   0       # if 1, socket_ew debug statements are logged 
     97 SocketDebug    1       # if 1, socket_ew debug statements are logged 
    9898                       # if 0, socket_ew debug is turned off 
    99  HBDebug       0       # if 1, heartbeats sent and received are logged 
    100                        # if 0, turned off 
    10199 
    102100# Directory where we should look for the NetQuakes miniSEED files 
  • trunk/params/pick_wcatwc.d

    r5931 r6401  
    1414#    Add file created in ATPlayer if used in conjunction with player (optional) 
    1515#    Comment this line if using pick_wcatwc in real-time mode 
    16 #ATPLineupFileBB "\DoNotCopyToEB\ATP-BB.sta    # Station config file 
     16#ATPLineupFileBB "\DoNotCopyToEB\ATP-BB.sta"    # Station config file 
    1717RedoLineupFile           1     # For player - 1->reset lineup file (regional locator=0) 
    1818# 
     
    6161# 
    6262Debug                    1     # If 1, print debugging message 
     63 
     64PickOnAcc 0  # if 1, pick on acceleration chans 
  • trunk/params/seisan_report.d

    r4598 r6401  
    2424WavDir ../../data/sausage_triggers 
    2525 
    26 # Agency for hypocentres and magnitudes 
     26# Agency for hypocentres and magnitudes. Note this can be a  
     27# maximum of 3 characters!! (Seisan requirement) 
    2728Agency BGS 
    2829 
  • trunk/params/srpar2ew.d

    r5930 r6401  
    1 # FILE: srpar2ew.d                  Copyright (c), Symmetric Research, 2004-2010 
     1# FILE: srpar2ew.d                      Copyright (c), Symmetric Research, 2004-2010 
    22# 
    33# This is the SrPar2Ew parameter file for acquiring data with a  
     
    130130# 
    131131 
    132 AtodDriverNameN    SrParXch1        # name of 2nd PARxCH kernel mode device driver installed 
    133 AtodModelNameN     PAR8CH           # which 2nd PARxCH is being used: must be PAR8CH 
    134 PortModeN          BPP              # protocol used for 2nd PC parallel port communications 
     132#AtodDriverNameN    SrParXch1        # name of 2nd PARxCH kernel mode device driver installed 
     133#AtodModelNameN     PAR8CH           # which 2nd PARxCH is being used: must be PAR8CH 
     134#PortModeN          BPP              # protocol used for 2nd PC parallel port communications 
     135 
    135136 
    136137 
     
    141142GpsEnable          ON               # ON if using PARGPS, OFF otherwise 
    142143GpsDriverName      SrParGps0        # name of PARGPS kernel mode device driver installed 
    143 GpsModelName       TRIMBLE          # usually TRIMBLE or GARMIN, use PCTIME for NTP time 
     144GpsModelName       GARMIN           # usually GARMIN or TRIMBLE, may be PCTIME for NTP time 
    144145GpsSerialPort      1                # COM port being used for serial NMEA messages 
    145146                                    # Note: GPS interrupts enabled for 1st PARxCH only 
     
    232233#            Channel   Sta   Comp  Net  Loc  Pin 
    233234#            -------   ---   ----  ---  ---  --- 
    234 EwChannelScnl   0      CH00  SHZ   SR   P1    0   # Channels from 1st PAR8CH 
    235 EwChannelScnl   1      CH01  SHZ   SR   P1    1 
    236 EwChannelScnl   2      CH02  SHZ   SR   P1    2 
    237 EwChannelScnl   3      CH03  SHZ   SR   P1    3 
    238 EwChannelScnl   4      CH04  SHZ   SR   P1    4 
    239 EwChannelScnl   5      CH05  SHZ   SR   P1    5 
    240 EwChannelScnl   6      CH06  SHZ   SR   P1    6 
    241 EwChannelScnl   7      CH07  SHZ   SR   P1    7 
    242 EwChannelScnl   8      DGTL  DIG   SR   P1    8 
    243 EwChannelScnl   9      MARK  GPS   SR   P1    9 
    244 EwChannelScnl  10      CNTR  GPS   SR   P1   10 
    245 EwChannelScnl  11      CH08  SHZ   SR   P2    0   # Channels from 2nd PAR8CH 
    246 EwChannelScnl  12      CH09  SHZ   SR   P2    1 
    247 EwChannelScnl  13      CH10  SHZ   SR   P2    2 
    248 EwChannelScnl  14      CH11  SHZ   SR   P2    3 
    249 EwChannelScnl  15      CH12  SHZ   SR   P2    4 
    250 EwChannelScnl  16      CH13  SHZ   SR   P2    5 
    251 EwChannelScnl  17      CH14  SHZ   SR   P2    6 
    252 EwChannelScnl  18      CH15  SHZ   SR   P2    7 
    253 EwChannelScnl  19      DGTL  DIG   SR   P2    8 
    254 EwChannelScnl  20      MARK  GPS   SR   P2    9 
    255 EwChannelScnl  21      CNTR  GPS   SR   P2   10 
     235EwChannelScnl   0      CH00  SHZ   SR   P8    0 
     236EwChannelScnl   1      CH01  SHZ   SR   P8    1 
     237EwChannelScnl   2      CH02  SHZ   SR   P8    2 
     238EwChannelScnl   3      CH03  SHZ   SR   P8    3 
     239EwChannelScnl   4      CH04  SHZ   SR   P8    4 
     240EwChannelScnl   5      CH05  SHZ   SR   P8    5 
     241EwChannelScnl   6      CH06  SHZ   SR   P8    6 
     242EwChannelScnl   7      CH07  SHZ   SR   P8    7 
     243EwChannelScnl   8      DGTL  DIG   SR   P8    8 
     244EwChannelScnl   9      MARK  GPS   SR   P8    9   # Include this when using PARGPS 
     245EwChannelScnl  10      CNTR  GPS   SR   P8   10   # Include this when using PARGPS 
  • trunk/params/srpar2ew.desc

    r6237 r6401  
    1 # FILE: srpar2ew.desc               Copyright (c), Symmetric Research, 2004-2010 
     1# FILE: srpar2ew.desc                   Copyright (c), Symmetric Research, 2004-2010 
    22# 
    33#            Descriptor File for the SrPar2Ew module 
     
    3737#    until the status manager is restarted. 
    3838# 
    39 tsec: 150  page: 0  mail: 100  
     39tsec: 150  page: 0  mail: 100 
    4040# 
    4141# Uncomment the "restartMe" line to enable automatic restart of this 
     
    6363# 
    6464#    <text> is a default character string that will be reported. 
    65 #    Enclose string in double-quotes if it contains embedded  
    66 #    blanks. Each module may also issue a text string for an  
     65#    Enclose string in double-quotes if it contains embedded 
     66#    blanks. Each module may also issue a text string for an 
    6767#    error, overriding the default message shown here. 
    6868# 
     
    144144err: 122  nerr: 1  tsec: 0  page: 0  mail: 5 
    145145text: "PARXCH ATOD NOT PAR1CH,4CH,8CH" 
     146# 
     147err: 123  nerr: 1  tsec: 0  page: 0  mail: 5 
     148text: "PARXCH NO IRQ ASSIGNED" 
    146149 
    147150 
  • trunk/params/tbuf2mseed.d

    r5931 r6401  
    11 
    2 #  tbuf2mseed just reuses the ringdup_scn file...its the same program, just compiled  
    3 # to write mseed out instead of tbuf2's 
     2# The tbuf2mseed command file is very similar to the ringdup_scn command file, as 
     3# it's basically the same program, just compiled to write mseed out instead of tbuf2s 
    44# 
    5 ringdup_scn configuration file 
     5tbuf2mseed configuration file 
    66# 
    77# 
     
    1313                                    # if 2, write to module log but not to  
    1414                                    # stderr/stdout 
    15  Debug     0 # set to 1 to see mseed packet creations 
     15 Debug     0                        # set to 1 to see mseed packet creations 
    1616# 
    1717# Logos of messages to export to client systems 
     
    2222 RingSize        100          # max# messages in outgoing circular msg buffer  
    2323 
     24# 
     25# Optional parameters 
     26# 
     27#FlushLatency 300             # flush any buffered data streams idle for this many seconds 
     28#Int32Encoding STEIM2         # specify miniSEED encoding for 32-bit integers, default STEIM2 
     29                              #   possible values are STEIM2, STEIM1 or INT32 (no compression) 
    2430 
    2531# List of station/channel/network/loc codes to duplicate. 
     
    4753# Send_scnl_remap JGR VHZ NC --   *   EHZ * *  # change component code only 
    4854# Send_scnl_remap CAL *   NC *    ALM *   * *  # send all component of CAL, but 
    49                                               # change the site code to ALM 
     55                                               # change the site code to ALM 
    5056Send_scnl * *  NM * 
    51  
  • trunk/params/template.d

    r6011 r6401  
    1212# List the message logos to grab from transport ring 
    1313#              Installation       Module          Message Types 
    14 GetEventsFrom  INST_WILDCARD    MOD_WILDCARD     HYP2000ARC & H72SUM2K 
     14GetEventsFrom  INST_WILDCARD    MOD_WILDCARD  HYP2000ARC H72SUM2K 
    1515 
     16 
     17 
  • trunk/params/trig2disk.d

    r6238 r6401  
    6565                          #   sac 
    6666                          #   ah  
     67                          #   mseed  
    6768                          #   seisan 
    6869                          #   gse_int  (GSE) 
     70                          #   uw  (UW2 format = University of Washington) - Unix only 
     71                          #   wfdisc  (CSS table and .w files) - Unix only 
    6972                          #   tank     (tankplayer input/raw Earthworm) 
    7073 
  • trunk/params/wave_serverV.d

    r6374 r6401  
    1212ServerIPAdr   0.0.0.0          # IP address of machine running wave_server 
    1313                               # 0.0.0.0 binds to all local available IPs 
    14 ServerPort    16023            # port for receiving requests & sending waves 
     14ServerPort    16022            # port for receiving requests & sending waves 
    1515GapThresh     1.5              # threshhold for gap declaration  
    1616                               # (in sampling periods) 
     
    7272#          names       size  (TYPE_TRACEBUF2 only)         (megabytes) (max breaks)     (full path)      Tank       
    7373 
    74 Tank    HKPS BHZ HK -- 4096  ${EW_INST_ID} MOD_WILDCARD       1         10000         ${EW_DATA_DIR}\HKPS.BHZ.HK.--.tnk 
     74Tank    GUID --- NC -- 528   ${EW_INST_ID} MOD_WILDCARD       1         10000         j:\data\usgs\datafiles\p1001.tnk 
     75Tank    IRG1 T   NC -- 528   ${EW_INST_ID} MOD_WILDCARD       1         10000         j:\data\usgs\datafiles\p1002.tnk 
     76Tank    IRG2 T   NC -- 528   ${EW_INST_ID} MOD_WILDCARD       1         10000         j:\data\usgs\datafiles\p1003.tnk 
    7577 
    7678 
  • trunk/params/waveman2disk.d

    r3971 r6401  
    145145#DataFormat                 tank 
    146146#OutDir                     "./tanks/" 
     147 
     148# UW2 format - UNIX ONLY 
     149#DataFormat                uw 
     150#OutDir                     "./uw/" 
    147151# 
    148152# 
Note: See TracChangeset for help on using the changeset viewer.